1.8 0r 2. tip for priming

[Booggerbe1]

Ok forum another question. I am using the Maxx Fill 2k primer for my priming on motorcycle parts both plastic and metal. what would be the better tip 1.8 or the 2 to use and not have to start adding a lot of reducer to get the primer on and lay flat. I will go back and sand my guide coat when the primer is dried. thanks again Booggerbe

 

[Booggerbe1]

Hey Forum, Correction on the tip size i have. I have a 2. and a 1.4 . The gun is a HVLP 20oz. As i asked what would be the better tip to use for the maxx Fill primer i am using. Thanks . Booggerbe

 

[flamepain]

where high build primmer is concerned the bigger the tip the better.so that would be the two.another thing i just learned is to let each coat almost dry before applying the next.i was having a problem sanding (sand paper clog)so i called my rep and he told me that solvents can get locked in the primer because it's so thick.even days later the primer was a pig to sand.lots of dry time between coats solved the problem.cyas

 

[Booggerbe1]

Thanks again Flame, As soon as i can get some warm weather here in Tn. ill start my priming. Ill try the #2 tip and as you said ill give each coat time to almost dry. Have you ever used the Maxx Fill 2K. I also have to prime a raw fron fender. I am going to etch prime it first and just before my primer coat hit it with a couple of coats of bullDog adhension and then hit it with the Maxx fill. Thanks agin and ill try again to send you some mod pics of the harley. booggerbe

 

[flamepain]

that's gonna be one nice custom when your done.post some pics so the guys here can see it.cyas