About to order HOK need some help

[tiller2nv]

Im going to shoot my bike with PBC44, PBC43 and PBC36 These are SHIMRIN DESIGNER PRL BASECOATS. Do I need to reduce these? If so what Reducer do you suggest? Im in Cali where its very hot out right now. Thanks for the help!

 

[tiller2nv]

Also is intercoat Clear SG100 a must between these colors?

 

[DaveK]

Ok... read this. This should cover most of the info you need.

HOK Tech

Intercoat clear is only needed to create a barrier for tape outs from artwork.

DaveK

 

[tiller2nv]

Thanks for your post! PERFECT!

 

[TWISTED]

also use the sg100 when you are going to be sanding. Don't sand the PBC.

 

[John Pierce]

You guys might want to refer to this link:

http://www.hokpaint.com/techman.html

for HOK tech sheets instead of the one at autobodysupply.net.... their online tech sheets are from 1995 and are incorrect for dry times and topcoat windows.

JP

 

[Kyle]

I wouldn't trust the mix ratios at autobodysupply.net either, I know the KP-II sealer is wrong on that site.