bleed through

[wammied]

I've read alot of great info on this board. Thanks for the resource, Scott. Now I have a question.
Will HOK intercoat clear over the top of kandy prevent it from bleeding through graphics sprayed on top of it?
Another words, if I spray kandy, then seal it with intercoat clear, then put my graphics on top, will I be O.K.? Again, thanks for all the info!

Mike

 

[DDG]

Simply put, NO! You must put a catalyzed clear over then to seal them in. Awhile back
I tried to short cut with sg-100 over a KBC, then sprayed white on top of that, no good.
Bled through and looked pinkish in areas that I sanded through to the KBC.
Had to seal it in with the real clear.
Lesson well learned.
Dirt