Buffing small parts.

[tiller2nv]

I wanted to know if there is a buffing pad that will fit a DA. Ive been trying to polish Motorcycle parts with a large buffer and it isnt going to well. Thanks for the help,
Steve

 

[John Pierce]

Scroll down to the "DA conversion pads" on this link:

http://www.innate.com/HOK/mirror_finish_B.htm

I've also used foam pads on a drill for really tight spots where I couldn't get my fingers in very well...

Good Luck,
John

 

[Stretch]

I just purchased some SurBuf polishing pads from Homestead Refinishing:

http://www.homesteadfinishing.com/htdocs/rubbingpolish.htm

Haven't had a chance to use them yet but it's an option. They're

-Stretch

 

[joe costanza]

I use my litte d/a cut a fome pad pt fit it it is hard to get it to shin but it is safe hook it d/a pad and fome

 

[Austin]

3M also makes micro buffing pads. Its 3", they have a wool pad and the black foam pads as well. I think Chcago Pneumatic makes a complete kit with the pads and a small buffer (looks about like a air grinder size).
Austin

 

[rex]

I use the 3"ers on an angle die grinder too,great setup.If you need real small Dremels work but you shouldn't be buffing in such areas a Dremmel is needed.