S
Stu
Guest
Ok.I have a couple questions,I've drained my tank,removed it from my bike (along with my fenders) and let it dry out a bit...Noticed a LARGE chuck of tank coating inside which I have broken up and removed.I can also see areas where the coating is missing and just hanging loosely.Does Kreem's tank prep remove the old coating or will I need something more powerful.Or can I just prep it & recoat it without removing the old coating?Also the tank was pressure tested originaly about 10 years ago before it was coated,should it be tested again.Any tips would be appreciated...Thanks for your help.