Grainy Finish in my new paint

Bluesting70

New member
Hello all. I’m new to the forum and have been learning to do my own paint on my classic. I used an acrylic primer, sanded to 800 final grit, 3 coats of acrylic enamel limco paint, then 3 coats of upol urethane clear. Overall I’m very happy but I can’t help but focus in on the grainy look. You can’t feel it on the clear and almost looks like it’s in the base coat. It’s been two days since I finish it and I hope it just needs to cure to “flatten” out?? Any advice would help. It’s only the hood so if I have to do over (would be my 4th attempt-all for different reasons) I’m willing to do so.
 
Top