OK i am ready to paint my car i need to know if i doing it right.
1) I have the car primed sealed and wiped down
2) Next should i paint the color for the transition stripe.
3) Tape the trasition color with blue 3m fine line tape.
4) Mask off top from the bottom to spray the top first using the transition tape to tape too.
5) Spray color let flash spray one lite coat of clear with prl in it, let flash.
6) Ok 1 1/2 hour passes for tape flash
7) Remove tape and plastic and tape off the top half.
8) Repeat step 5 thru 7
9) wipe down
10) Spray one lite coat of clear follow by 3 med coats of clear.
I am using 2 different colors of prl one each for the different colors of the split. I am totoly new to two toneing a car so any help you can give would help...
I am using PPG DBC PPG 2002 and 3m blue fine line tape and 3m green tape.
1) I have the car primed sealed and wiped down
2) Next should i paint the color for the transition stripe.
3) Tape the trasition color with blue 3m fine line tape.
4) Mask off top from the bottom to spray the top first using the transition tape to tape too.
5) Spray color let flash spray one lite coat of clear with prl in it, let flash.
6) Ok 1 1/2 hour passes for tape flash
7) Remove tape and plastic and tape off the top half.
8) Repeat step 5 thru 7
9) wipe down
10) Spray one lite coat of clear follow by 3 med coats of clear.
I am using 2 different colors of prl one each for the different colors of the split. I am totoly new to two toneing a car so any help you can give would help...
I am using PPG DBC PPG 2002 and 3m blue fine line tape and 3m green tape.