Kandy's on a Frame - need help

G

gpracer15

New member
Kandy\'s on a Frame - need help

Just wanting to get feedback from people who might have sprayed Kandy colors on a Harley type frame...

How hard is it to keep the color consistant?
Anything that can help would be appreciated, I have my doubts ha ha. Im just thinking it will be real hard to keep it from having light or dark spots in the job....

Thanks
Chuck D
 
B

BonesFX

Guest
Re: Kandy\'s on a Frame - need help

Unless you're using a very light colored kandy, you should be ok -- Round out your spray tip to the thinest point you can and back off the fluid. Shoot just like any other part and try to overlap. You might consider using a slow reducer and/or an additive to slow down your flash time - It could take up to 20-30 min. to shoot just one coat on - remember where you start and where you finish on each bar and for the whole thing --- Good Luck --- Bones!~
 
You must log in or register to reply here.
Top