Please help with mixing!!!!!

[mike]

I'm very new at this and have a question about mixing. I am mixing some primer/sealer and it is a three part mix 4 to 1. On the mixing cup it has
4 : 1 : 10% : 1 : 1.5
after I put in the primer in I don't know if the converter or activator goes in next and don't know which one of the marks above it goes to. Where I live there is no shop close by to ask so can someone please help me with this, Thanks Mike.

 

[BonesFX]

Go to the company's website and look for tech sheets on the product you're using. I've never heard of converter -- Bones!~

 

[mike]

Thanks for the help. I finnally found a guy in town here that showed me how to use the mixing cup. On the can it say's
Dupont
URO
Primer- Filler
Fast Converter
1135 S
Do you know if it's ok to prime over primer that has dried. I'm using a build up primer filler and after I sanded the high spots I'm back down to metal in some places and one or two more medium coats I should be smooth as glass(I Hope) I'm very new at this, Thanks again, Mike.

 

[BonesFX]

As log as you sand between coats you should be OK!! ----Bones!~

 

[mike]

Thanks!

 

[rex]

If it's a thick primer and you're only going to final sand it with fine paper 2 coats is cool but if you're really going to sand it or it reduces down fairly thin go 3,it's best to keep at least 1+ coats over your breakthroughs.