primer

['03 zx6r]

going to paint my buddies bike flat black. going with kustoms hot rod flatz. question is, do i need hardener in the primer? the kit comes with a reducer and hardener with the color, the quart kit. would that hardener suffice to cover the primer if need?

 

[TAZ]

Most of today's primers and sealers do require a hardener. You'll need to ready the labels and see which hardener the primer or sealer requires.
You can also have to add a little bit of reducer in the mix.

 

['03 zx6r]

thanks a lot. Taz

 

['03 zx6r]

have another question. Was going to fiberglas and then use body filler. Thing is, i heard that i need to use sealer for the filler before primer. Can I just use the glass and then primer?

thanks a lot guys

 

[hoss]

i've had no problems priming over fiber glass. just be ready for little pinholes that are in your fiberglass. look really close for all those areas. but i've had no problems w/ priming over fiberglass.

 

['03 zx6r]

ok thanks a lot hoss, I appreciate it. So the same would go for the filler?