question agout sg100 and kandy koncentrate

[revvinkevin]

I just mixed up some sg100 and kandy koncentrate to make my own kandy color. I had some places where the sg 100 lifted when unmasking. Do you think I unmasked too soon or too late? It was sort of "rubbery" when I pulled the tape up.Thanks for any help.

 

[AirArt]

If you read my reply to Hoss's problem, you'd see I don't use the HOK SG-100 much anymore for mainly the same reason you encountered. It lifts too damn easy! Lately I only use the SG-100 mixed with KK on areas that don't need masking, such as shading in dark areas or adding some color to add depth. The SG-100 needs LOTS of tooth. I prefer to mix a small amount of clear and then tint with the KK.
On the attached pic of a closeup skull eye, I used the SG-100 with some tangerine KK but it was freehand and no taping required.
I think SG-100 causes a lotta problems for folks. I'd rather use clear/KK mix and not worry about it lifting.
Good luck,
Phil

 

[Austin]

Does HOK make a catalyst for their base coats? I know PPG does, if they do that might help. So far I've only used the KU kandys.
Austin

 

[AirArt]

I've never read anywhere that the HOK catalyst can or should be used with their basecoats but I have always added a drop or two when using HOK striping enamels.
I would think that the UK catalyst could be used with the basecoats, but sparingly. Try a few test panels. I can't see where it could hurt unless too much was used.
Let us know what ya find out Austin.
Phil