spraying 2 pack paints

[Marshro]

hey guys im new to this forums and was seaking some advice im respraying my jetski with 2 pack i just did my primer and some some reason it was putting little string things on the hull they just brush off but how can i stop this from happening ??? i am using a good suction gun (devilbis) can any one give me some pointers??? also what will i expect when i put the coulor down will it be thick? like water??? i have never used it before so can you guy let me know what to expect???




cheers Rory

 

[Wydir]

does the primer require any kind or reducer ? sounds like its unreduced

tell us what are the exact products you are using

 

[Marshro]

4 to 1 for the primer and harder and 2 to 1 +%10 thinners for the black! i worked out what my problem is fixed it and sprayed the colour whats the best way to finish the paint ??? 1200grit paper and a cut and buff????



thanks Rory

 

[TAZ]

What did the problem end up being just in case anyone reads this and has the same problem.

Also, you didn't mention what 'type' of paint you are using.
If you are using a 'thinner', I would guess you are using lacquer?
Most of today's paints use reducers.

 

[Marshro]

i found that the rags i was using to wax and greac remover was actualy leaving fine thread on the surface so i surest a good tack rag before painting

 

[TAZ]

Ahhh, okay, thanks for the post! I'm sure you just saved another painter's paint job