Using marblizer

[hopper47]

Can anyone give me some info on how to use marblizer? I want to paint the flames with it after the base and clear are layed down. How long should you wait after spraying it before you start patting the stuff. Any suggestions as to what to use. All the paint is HOK.

 

[Austin]

You hit it right away, if you wait too long it will dry up and you won't get the effect.
Austin

 

[hopper47]

Can you give me mor info like how long to wait after spraying, what is best to use, and etc.
Thanks
Hoppy

 

[alienboy]

Shoot your b/c and let dry around 15-30 minutes.
Shoot your marbilizer (make sure you do only 1 part at a time)
Let it dry about 1-2 minutes then use your saran wrap.
After you have done your marbilizing effect let it dry 20-30 minutes, then spray a few coats of SG-100.
Let dry about 15 minutes and shoot your clear, or kandy, or what every.
From what I have heard make sure you do not forget your sg-100. If you shoot clear over the marbilizer it will ruin it.
Anything else?